[bars] Yaesu rotor

[Tim KC1RET]

I was aware that at some point they switched between AC & DC motors, but 
I didn't know which the G-800 (no suffix) employed.

Many thanks for the info. - your Google-fu is obviously stronger than 
mine. ;-)

T.

On 6/6/2023 19:11, KC1SOZ wrote:
> I just checked the specs and pinouts. They are exactly the same. The 
> G-1000 controller is a G-800 that can handle a little more torque, 
> calls for an additional 0.5A of juice, puts out the same voltages to 
> the rotor and the connectors on the control cable are exactly the 
> same. They both use pins 1-5, and 6 is not used. The newer versions 
> have model numbers that end in "DXA" and the only major difference is 
> that they use DC motors instead of AC.
>
> 73,
> KC1SOZ
> Juan
>
>
> On Tue, Jun 6, 2023 at 6:21 PM Tim KC1RET <kc1ret.radio at gmail.com> wrote:
>
>     I picked up a rotor labeled "G-800" as well as a controller
>     labeled "G-1000DXA" from separate sellers at a hamfest awhile
>     back. Do they play well together? I can't seem to find any info on
>     a 'G-800' without a suffix such as 'DXA' or 'S', etc.
>     Any help will be appreciated! 73
>     -- 
>
>     Courageously sent from a non-Apple device that /includes/ a
>     headphone jack.
>
>     ------------------------------------------------------------------------
>     <https://kc1ret.com/img/kc1ret-qsl-card-front-v3.png> 	
>
>
>           Tim Carter - KC1RET
>
>     			
>
>     	+1.978.710.0133 <tel:1.978.710.0133>
>
>     	kc1ret.radio at gmail.com
>
>     	https://kc1ret.com
>
>     "Computers are incredibly fast, accurate and stupid; humans are
>     incredibly slow, inaccurate and brilliant; together they are
>     powerful beyond imagination." -- /Albert Einstein/
>
>     Warning: Spelling errors in this message are the product of a poor
>     school system. Pay teachures more than athletes.
>     IMPORTANT: This email is intended for the use of the individual
>     addressee(s) named above and may contain information that is
>     confidential privileged or unsuitable for overly sensitive persons
>     with low self-esteem, no sense of humor or irrational religious
>     beliefs. If you are not the intended recipient, any dissemination,
>     distribution or copying of this email is not authorized (either
>     explicitly or implicitly) and constitutes an irritating social
>     fauxpas. No animals were harmed in the transmission of this email,
>     although the mutt next door is living on borrowed time, let me
>     tell you.
>
>     _______________________________________________
>     bars mailing list
>     bars at w1hh.org
>     http://mail.w1hh.org/mailman/listinfo/bars_w1hh.org
>

-- 

Courageously sent from a non-Apple device that /includes/ a headphone jack.

------------------------------------------------------------------------
<https://kc1ret.com/img/kc1ret-qsl-card-front-v3.png> 	


      Tim Carter - KC1RET

			

	+1.978.710.0133 <tel:1.978.710.0133>

	kc1ret.radio at gmail.com

	https://kc1ret.com

"Computers are incredibly fast, accurate and stupid; humans are 
incredibly slow, inaccurate and brilliant; together they are powerful 
beyond imagination." -- /Albert Einstein/

Warning: Spelling errors in this message are the product of a poor 
school system. Pay teachures more than athletes.
IMPORTANT: This email is intended for the use of the individual 
addressee(s) named above and may contain information that is 
confidential privileged or unsuitable for overly sensitive persons with 
low self-esteem, no sense of humor or irrational religious beliefs. If 
you are not the intended recipient, any dissemination, distribution or 
copying of this email is not authorized (either explicitly or 
implicitly) and constitutes an irritating social fauxpas. No animals 
were harmed in the transmission of this email, although the mutt next 
door is living on borrowed time, let me tell you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.w1hh.org/pipermail/bars_w1hh.org/attachments/20230606/9e472ac9/attachment.htm>