[bars] Oak tree vs dipole

[Joanne Dolan]

Here’s the setup I used for the dipole:
Pic #1) Using endless loops, this end is attached to the chimney with a counter weight.
Pic #2) the dipole then goes up over the roof, usually higher than what’s pictured.
Pic #3) balun still attached to antenna and coax in tree at 2nd point of support.
Pic #4) last end of dipole, still attached to endless loops, pictured in this tree.
             Note: all the green pictured from the ground up is the oak broken branch.
                        Pictures to follow.




-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 486804 bytes
Desc: not available
URL: <http://mail.w1hh.org/pipermail/bars_w1hh.org/attachments/20251004/ff8b2dbb/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 390936 bytes
Desc: not available
URL: <http://mail.w1hh.org/pipermail/bars_w1hh.org/attachments/20251004/ff8b2dbb/attachment-0001.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image2.jpeg
Type: image/jpeg
Size: 570858 bytes
Desc: not available
URL: <http://mail.w1hh.org/pipermail/bars_w1hh.org/attachments/20251004/ff8b2dbb/attachment-0002.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image3.jpeg
Type: image/jpeg
Size: 606147 bytes
Desc: not available
URL: <http://mail.w1hh.org/pipermail/bars_w1hh.org/attachments/20251004/ff8b2dbb/attachment-0003.jpeg>
-------------- next part --------------

Sent from my iPad