<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css" style="display:none;"> P {margin-top:0;margin-bottom:0;} </style>
</head>
<body dir="ltr">
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
So attempting to get a Yaesu FT817 up and running on digital modes for experimenting.
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
My issue is that I'm getting audio to the end of the data cable and the ptt is being activated but the meter is showing pretty much nothing for audio output, almost as if the jack is broken, I checked for any bad solder joints on the board and everything looks
decent and not showing any open or high resistance. I'm a little new and confused I'll admit, my system is running linux (knoppix) and everything else is working, decodes, rig control etc. I'd almost wonder if anyone had any suggestions!
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
Working on my drone practice with the plan to fly a nice high messenger over the treetops to facilitate pulling a wire up for an end fed
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
Much Obliged</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
-Jason <br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
KB1KEG. <br>
</div>
</body>
</html>