<div dir="ltr">I've been looking at building my own programming cable for a Yaesu FT-2980R. It looks like programming is just another way of cloning, except one side is a computer. The PTT on RJ12 pin 6 is used for both tx and rx, and it sounds like it's standard RS-232 5v TTL levels. Been trying to get Yaesu to give me more info but they've been ghosting me. Not very nice of them.<div><br></div><div>Anyway, it looks like on the PC side gnd <-> gnd, but the PTT on the radio connects to both rx and tx on the serial port, with a diode on the tx output of the serial port.</div><div><br></div><div>Sound about right to any of you?</div></div>