<div dir="ltr">Chris, All - <div><br>One thing that wasn't clear to me as a new FT-mode operator (I'm still not a very regular user) was how I should control power output. There are many positions taken / methods used if you search for this online. Since you're basically using USB from the radio's perspective, the actual transmitted power is controlled both by the power setting in the radio, and the settings in your computer & software which create the audio input. </div><div><br></div><div>The advice I've gotten most from operators I trust is - set the radio to the maximum intended power level. E.g. on a desktop rig this could be 100%/100W, or say half that if you want to de-rate for digital mode duty cycle. Then use the power output slider at the lower right side of the WSJTX interface to control the actual output level. Make sure that Windows (or other OS, but Windows always seems to change things when you're not looking) isn't applying some other level control (there are per-interface and sometimes per-program settings in the Sound control panel or whatever it's called). Watch the meters on the radio to assess your actual peak output and to make sure that ALC is not reaching 100%, which will cause you to splatter. </div><div><br></div><div>Probably a good idea to start with low power and ramp up after you show that you have the audio and control paths working. You can also check that audio is being sent by routing it to the speakers instead of to the radio audio interface.</div><div><br></div><div>If you come back to the setup after having things disconnected (or after Windows has updated), and find that you seem to have no output, check the settings on the computer side first. Especially on Windows I find that often the COM port has changed, or gotten disconnected from the digimode program, or something ... or the audio/"mixer" settings have changed and are sending the output to the wrong place. Related to that - make sure that you're not sending <i>all</i> sound from your computer to the rig audio interface when it's plugged in - including beeps/alerts, music you're playing, etc.</div><div><br></div><div>Again, I'm not the most regular FT* user, but you asked for some starting-point tips and those are things I've run into while dabbling with FT-x, Feldhell, js8call, etc. Glad to hear from others too.</div><div><br></div><div>73,</div><div>Adam / AA1N</div></div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Sun, May 4, 2025 at 11:14\u202fPM Tim - K1DC via bars <<a href="mailto:bars@w1hh.org">bars@w1hh.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><u></u>
<div>
<p><font size="4" face="Verdana">Congrats, Chris!</font></p>
<p><font size="4" face="Verdana">Please ping me if you have
questions.</font></p>
<p><font size="4" face="Verdana">Tim/K1DC<br>
</font></p>
<div>On 5/4/2025 16:00, Christopher Lennon
wrote:<br>
</div>
<blockquote type="cite">
<p dir="ltr">Well thanks for the encouragement all. </p>
<p dir="ltr">It turns out that getting receive to work was as
simple as connecting all the cables together and turning it on.
Getting it to transmit was another matter. Hours of YouTube
videos later and the settings were right and the G90 quirk that
line input gain needs to be maxed out. </p>
<p dir="ltr">I didn't call CW, so I didn't show up on the psk
reporter, but I completed a QSO with KU4OC. </p>
<p dir="ltr">Thanks!<br>
Chris<br>
W2BPL</p>
<p dir="ltr">PS I had hold TXfreq checked!</p>
</blockquote>
<div>-- <br>
<p style="font-family:Verdana,Geneva,sans-serif;font-size:10px">Courageously
sent from a non-Apple device that <em>includes</em> a headphone
jack.</p>
<hr>
<table cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td>
<table cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td width="150"><a href="https://k1dc.com/img/k1dc-qsl-card-front.png" target="_blank"><img role="presentation" src="https://k1dc.com/img/k1dc-qsl-card-front-sm.jpg" width="130"></a></td>
<td>
<h3>Tim Carter - K1DC</h3>
</td>
<td width="30"> </td>
<td width="30"> </td>
<td>
<table cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td width="30">
<table cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td><img src="https://k1dc.com/img/phone-icon.png" width="13"></td>
</tr>
</tbody>
</table>
</td>
<td><a href="tel:1.978.710.0133" target="_blank">+1.978.710.0133</a></td>
</tr>
<tr>
<td width="30">
<table cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td><img src="https://k1dc.com/img/email-icon.png" width="13"></td>
</tr>
</tbody>
</table>
</td>
<td><a href="mailto:k1dc.radio@gmail.com" target="_blank">k1dc.radio@gmail.com</a></td>
</tr>
<tr>
<td width="30">
<table cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td><img src="https://k1dc.com/img/link-icon.png" width="13">
</td>
</tr>
</tbody>
</table>
</td>
<td><a href="https://k1dc.com" target="_blank">https://k1dc.com</a></td>
</tr>
</tbody>
</table>
</td>
</tr>
</tbody>
</table>
<p>"Computers are incredibly fast, accurate and stupid;
humans are incredibly slow, inaccurate and brilliant;
together they are powerful beyond imagination." -- <i>Albert
Einstein</i></p>
<p style="font-family:Verdana,Geneva,sans-serif;font-size:10px">Warning:
Spelling errors in this message are the product of a
poor school system. Pay teachures more than athletes.<br>
This email is intended for the use of the individual
addressee(s) named above and may contain information
that is confidential privileged or unsuitable for overly
sensitive persons with low self-esteem, no sense of
humor or irrational religious beliefs. If you are not
the intended recipient, any dissemination, distribution
or copying of this email is not authorized (either
explicitly or implicitly) and constitutes an irritating
social fauxpas. No animals were harmed in the
transmission of this email, although the mutt next door
is living on borrowed time, let me tell you.</p>
</td>
</tr>
</tbody>
</table>
</div>
</div>
_______________________________________________<br>
bars mailing list<br>
<a href="mailto:bars@w1hh.org" target="_blank">bars@w1hh.org</a><br>
<a href="http://mail.w1hh.org/mailman/listinfo/bars_w1hh.org" rel="noreferrer" target="_blank">http://mail.w1hh.org/mailman/listinfo/bars_w1hh.org</a><br>
</blockquote></div><div><br clear="all"></div><div><br></div><span class="gmail_signature_prefix">-- </span><br><div dir="ltr" class="gmail_signature">"Be well, do good work, and keep in touch." -Garrison Keillor</div>