[bars] A quick question going digital

[Jason Grennell]

So attempting to get a Yaesu FT817 up and running on digital modes for experimenting.

My issue is that I'm getting audio to the end of the data cable and the ptt is being activated but the meter is showing pretty much nothing for audio output, almost as if the jack is broken, I checked for any bad solder joints on the board and everything looks decent and not showing any open or high resistance.   I'm a little new and confused I'll admit, my system is running linux (knoppix) and everything else is working, decodes, rig control etc.  I'd almost wonder if anyone had any suggestions!

Working on my drone practice with the plan to fly a nice high messenger over the treetops to facilitate pulling a wire up for an end fed

Much Obliged
-Jason
KB1KEG.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.w1hh.org/pipermail/bars_w1hh.org/attachments/20210721/8897d5dc/attachment.htm>